The machine tool is designed by three-dimensional modeling and finite element method. The overall layout and key structures of the machine tool are analyzed and calculated theoretically. The machine tool has the characteristics of high rigidity, small thermal deformation, low temperature rise of the spindle, small vibration, low noise of the whole machine, large cutting torque and adaptability to heavy cutting.
| Model | CS61(2)50 | CS61(2)66 |
| Swing dia. over bed | φ500mm | φ660mm |
| Swing dia. over cross slide | φ300mm | φ420mm |
| Max. swing dia. over gap | φ710mm | φ870mm |
| Effective length in gap | 240mm | 240mm |
| Bed width | 440mm | 440mm |
| Spindle nose | D8 | D8 |
| Spindle through hole dia. | 82/105 mm | φ105mm |
| Spindle speeds | 9-1600rpm, 24steps | 30-1600rpm, 12steps |
| Max. travel of compound rest | 145mm | 145mm |
| Max. travel of cross slide | 320mm | 310mm |
| Z-axis leadscrew pitch | 12mm or 2TPI | 12mm or 2TPI |
| Section of tool | 25x25mm(1x1") | 25x25mm(1x1") |
| X-axis feedrate | 1.9m/Min, 50Hz; 2.3m/Min, 60Hz | 1.9m/Min, 50Hz; 2.3m/Min, 60Hz |
| Z-axis feedrate | 4.5m/Min, 50Hz; 5.4m/Min, 60Hz | 4.5m/Min, 50Hz; 5.4m/Min, 60Hz |
| X-axis feeds | 0.027-1.07mm/rev, 65kinds | 0.027-1.07mm/rev, 65kinds |
| Z-axis feeds | 0.063-2.52mm/rev, 65kinds | 0.063-2.52mm/rev, 65kinds |
| Metric threads | 1 - 14 mm, 22 kinds/ 0.5-224mm 48 kinds | 1 - 14 mm, 22 kinds/ 0.5-224mm 48 kinds |
| Inch threads | 28 - 2 TPI, 25 kinds/ 72-1/8 TPI,46 kinds | 28 - 2 TPI, 25 kinds/ 72-1/8 TPI,46 kinds |
| Module threads | 0.5 - 7 , 18 kinds/ 0.5-112,42 kinds | 0.5 - 7 , 18 kinds/ 0.5-112,42 kinds |
| Diametric pitch threads | 56 - 4 DP, 24 kinds/ 56-1/4 DP, 45 kinds | 56 - 4 DP, 24 kinds/ 56-1/4 DP, 45 kinds |
| Dia. of tailstock sleeve | φ75mm | φ75mm |
| Taper of tailstock sleeve | Morse taper No.5 | Morse taper No.5 |
| Travel of tailstock sleeve | 150mm | 150mm |
| Main motor | 7.5KW (10HP) | 7.5KW (10HP) |
| Rapid traverse motor | 300-370W (1/2HP) | 300-370W (1/2HP) |
| Coolant pump motor | 120W (1/6HP) | 120W (1/6HP) |
Within 2 hours.
24/7 online.
One year, with lifetime cost-of-sale service after that.
One-year trade-in for accessories.
Lifetime free online and paid offline support.
All products come with a factory-provided certificate of conformity.
